Radon exists as an odorless and colorless gas that is formed by decaying of uranium. Homes are exposed to approximately 100 Bq/m3 indoors. The gas gets into the house by means such as cracks, gaps or cavities in the house structure. The gas mostly penetrates into the house through the lowest area in the house in contact with the ground. Radon is the second most cause of lung cancer in the USA. Radon testing Illinois is a sure way of detecting this gas. The following are the ways in which to do a proper test
Radon testing sets have to be purchased and put together. This are found in hardware stores as well as in any departmental store. They are very affordable ad accredited for safe use in the house. They have steps that need to be taken indicated and it is your responsibility to see to it that what is required is achieved. It generally takes about three days to one month to get a sample.
The house has to be on lock down for a minimum of 12 hrs before the radon kit is put in use. This is to ensure that if any gas is present, it will not escape out and thereby give inaccurate results. It has to be noted that the air in your home is the sample needed.
The radon set is then open and all the contents are removed. It should have sampling flasks, a sheet explaining what the test is about. Some sets have record entry sheets as well as location of the laboratory where specimen will be sent
The cellar or sitting area is the most preferable area to do the assessment as more often than not. This are the areas whose grounds are closer to the earth than the rest of the house. It is preferred for the assessments to be done in this area as it is also the area where you spend most of your time in.
It is suggested for the sampling flasks to be put within 20 or so inches of the ground and 6 inches separately. A steel rule can be used to ascertain the distance. Using a steel rule is the best tool for achieving this measurement.
The caps of the testing containers are then removed and left without any sort of disturbance. Make sure that no one interferes with the test containers and that they are not moved from their designated spot. They should just be left to their own devises for this time period.
The average time it takes for the flasks to be ready for analysis is around 2 to 3 days. You should not let the containers sit in the sampling room for more than 5 days. If you are in use of any aerosols, heaters or fans, they will have to be discontinued during the sampling period as they cause interferences.
After the minimum wait time has passed, replace the lids carefully and fill out the data sheet that was in the radon kit. You can also fill out the cost sheet if it is available. You should secure the test containers and send it to the laboratories as soon as possible in order to ensure optimum and accurate results for radon testing Illinois.
Radon testing sets have to be purchased and put together. This are found in hardware stores as well as in any departmental store. They are very affordable ad accredited for safe use in the house. They have steps that need to be taken indicated and it is your responsibility to see to it that what is required is achieved. It generally takes about three days to one month to get a sample.
The house has to be on lock down for a minimum of 12 hrs before the radon kit is put in use. This is to ensure that if any gas is present, it will not escape out and thereby give inaccurate results. It has to be noted that the air in your home is the sample needed.
The radon set is then open and all the contents are removed. It should have sampling flasks, a sheet explaining what the test is about. Some sets have record entry sheets as well as location of the laboratory where specimen will be sent
The cellar or sitting area is the most preferable area to do the assessment as more often than not. This are the areas whose grounds are closer to the earth than the rest of the house. It is preferred for the assessments to be done in this area as it is also the area where you spend most of your time in.
It is suggested for the sampling flasks to be put within 20 or so inches of the ground and 6 inches separately. A steel rule can be used to ascertain the distance. Using a steel rule is the best tool for achieving this measurement.
The caps of the testing containers are then removed and left without any sort of disturbance. Make sure that no one interferes with the test containers and that they are not moved from their designated spot. They should just be left to their own devises for this time period.
The average time it takes for the flasks to be ready for analysis is around 2 to 3 days. You should not let the containers sit in the sampling room for more than 5 days. If you are in use of any aerosols, heaters or fans, they will have to be discontinued during the sampling period as they cause interferences.
After the minimum wait time has passed, replace the lids carefully and fill out the data sheet that was in the radon kit. You can also fill out the cost sheet if it is available. You should secure the test containers and send it to the laboratories as soon as possible in order to ensure optimum and accurate results for radon testing Illinois.
About the Author:
Read more about Information On Gradual Radon Testing Illinois visiting our website.
No comments:
Post a Comment